According to Appendix E of The Lord of the Rings, this has the same
relation to ⟨y⟩ ([j]) as ⟨hw⟩ ([ʍ]) does to ⟨w⟩ ([w]) – this probably
means the voiceless palatal fricative [ç], though Wikipedia says a
voicless palatal approximant (which would be closer to [j], the voiced
palatal approximant) is sometimes also posited.
We previously emitted [[hj]] for ⟨hy⟩, which sounds fairly close to [ç],
similar to how [[hw]] is fairly close to [ʍ] (see previous commit) –
however, translating it into [[C]] again means better --ipa output.
(In Sindarin, ⟨hy⟩ does not occur.)
This is “a voiceless w, as in English white (in northern pronunciation)”
according to Appendix E of The Lord of the Rings, and so we copy the
[[w#]] phoneme from the English phonemes. I can’t actually hear much of
a difference from the previous [[hw]] (I know what the difference
between [[w]] and [[w#]] should be, but [[hw]] already sounds like
[[w#]] to me), but at least this improves the --ipa output, changing it
from [hw] to [ʍ].
Both represent a “voiceless R”, which I believe means a voiceless
alveolar trill, [r̥]. Ideally this would be one phoneme, but I’m not sure
eSpeak NG currently has a phoneme for this. The Wikipedia article [1][2]
lists occurrences in comparatively few languages, and I chose Welsh for
guidance: eSpeak NG currently turns Welsh “Rhagfyr” into [[hr'agvYr]],
and [[h]] and [[r]] are apparently just two separate phonemes, so for
now we do the same for Quenya and Sindarin, and emit hR.
[1]: https://en.wikipedia.org/wiki/Voiceless_alveolar_trill
[2]: https://en.wikipedia.org/wiki/Special:PermanentLink/1024721264
Both represent a “voiceless L”; Appendix E of The Lord of the Rings
notes that the Quenya ⟨hl⟩ was pronounced like /l/ by the Third Age, but
for now we reproduce the original pronunciation. (Maybe we can later use
conditional rules for different pronunciations, but I think for now I
won’t go down that road.)
The B-side of the album Poems and Songs of Middle Earth begins with a
reading of the Sindarin poem A Elbereth Gilthoniel by J.R.R. Tolkien
himself, and in this recording, as best I can tell, he always pronounces
short i (i.e. ⟨i⟩, not ⟨í⟩ or ⟨î⟩) as /ɪ/ rather than /i/, regardless of
stress; for instance, the word “silivren” has the same i-sound twice (it
is not “silívren”). I believe this means that we should use the phoneme
[[I]], not [[i]], for ⟨i⟩ (in both Quenya and Sindarin).
Appendix E of The Lord of the Rings describes it as “the sound heard in
bach (in German or Welsh)”; I think that means [χ], not [x] (voiceless
uvular rather than velar fricative), and out of the base1 phonemes,
[[X]] is closer to that than [[x]]. (The German phonemes redefine [[x]]
to be closer to [[X]], if I’m not mistaken, but I don’t think we need
that. Note also that we actually need [[x]] for Quenya ⟨ht⟩.)
According to Appendix E of The Lord of the Rings, “[t]he Quenya
combination ht has the sound of cht, as in German echt, acht”. As echt
and acht do not have the same cht sound in German, I assume this means
that they are allophones in Quenya just as in German, and ⟨ht⟩ means
[çt] after front vowels but [xt] after back vowels. Add tests for both:
Telumehtar, the Quenya name of the star Orion, is given in Appendix E as
an example of ⟨ht⟩; Mahtar is the father of Nerdanel, wife of Fëanor.
According to the regular stress rules from Appendix E of The Lord of the
Rings, all three of these words should be stressed on the penultimate
(second) syllable, since that syllable is followed by two consonants;
however, the way they are used in poems suggests they should actually be
stressed on the antepenultimate (first) syllable (example: “in IMlaDRIS
it DWELLS”). According to Concerning Stress Placement In Sindarin [1],
this can be attributed to a hypothetical “muta cum liquida” rule like in
Latin, where some syllables count as light even if they’re followed by
two consonants, because both consonants belong to the following syllable
(e.g. IM-la-dris instead of im-LAD-ris). However, the rule is apparently
not applied systematically: according to [2], in another poem the word
“nogothrim”, which is quite similar in structure to “Nargothrond”, is
clearly stressed on the penultimate syllable. For this reason, we don’t
try to define the “muta cum liquida” rule in sjn_rules (or qya_rules),
but only add the three names Imladris, Menegroth and Nargothrond as
exceptions to the sjn_list.
[1]: https://menegroth.github.io/stress-in-sindarin.html
[2]: https://mildred-of-midgard.dreamwidth.org/158375.html#comment-cmt49575
Stress is determined based on the syllables, not the vowels, so the
diphthongs need to count as a single syllable. If there is a diphthong
at the end of a word, the penultimate syllable can still be unstressed
if it is light. (The name of Arvedui, last king of Arthedain, is one
example of this that I could think of, but I’m sure it’s not the only
one.)
We used to inherit it from the Latin phonemes, which, as I noted in the
commit adding the Sindarin diphthongs, sounds more like /ae/ than /ai/.
Copy the phoneme from Sindarin so that it sounds like /ai/, not /ae/.
(There is no ⟨ae⟩ diphthong in Quenya, so we don’t need a copy of that.)
I’m not aware of any statement by Tolkien to this effect, but it just
seems natural to me, and the [ŋ] is at least found in the Omikhleia
Sindarin dictionary [1] (e.g. entry tinc, [tˈiŋk]).
Based on a similar phoneme rule in ph_english.
[1]: https://www.jrrvf.com/hisweloke/sindar/index.html
For ⟨ae⟩, we used to use the Latin [[aI]] phoneme, which sounds like
/ae/. Call that phoneme [[aE]] for us and introduce a separate [[aI]]
one, which sounds more like /ai/ (since Sindarin has both, and they’re
supposed to sound different, though Appendix E of The Lord of the Rings
notes that there is nothing closely corresponding to ⟨ae⟩ in English and
that it may be pronounced like ⟨ai⟩). Furthermore, for ⟨oe⟩, just remove
the TODO – the Latin phoneme is called [[OI]] but sounds more like /oe/
than /oi/, so it’s actually just fine for our purposes. Finally, the
⟨ui⟩ diphthong is copied from Finnish, just like in Quenya.
Both are copied from the Finnish phonemes, since Finnish was a major
inspiration for Quenya. This means that the ⟨iu⟩ diphthong is a
“falling” one – according to Appendix E of The Lord of the Rings, this
is the original pronunciation, but by the Third Age (the time in which
The Lord of the Rings is set) it had become a “rising” one, so I may
change the phoneme later, not sure.
According to Appendix E of The Lord of the Rings, ⟨ph⟩ stands for /f/
when final (because ⟨f⟩ is pronounced as /v/ in that position), and
otherwise is used instead of ⟨f⟩ either because it’s derived from ⟨p⟩
(in which case it’s presumably pronounced just like ⟨f⟩), or to
represent an especially long /f/. We can’t really tell which case we
have, but from the Omikhleia Sindarin dictionary [1], it appears that
all the long ⟨ph⟩’s are between two vowels, and all the short ones have
at least one adjacent consonant, so let’s use that as a rule and hope it
works out. (The Ambar Eldaron Quenya dictionary [2] is less easily
searchable, so I’m just hoping that this rule works reasonably well for
both languages.)
[1]: https://www.jrrvf.com/hisweloke/sindar/index.html
[2]: https://ambar-eldaron.com/telechargements/quenya-engl-A4.pdf
Not all of the diphthongs in Quenya and Sindarin are defined in the
Latin phonemes, and for now we’re sticking to those, so some diphthongs
just get TODOs for now. Also, we’re temporarily using the same phoneme
for ⟨ae⟩/⟨ai⟩ and ⟨oe⟩/⟨oi⟩, which should really be different (though
Appendix E of The Lord of the Rings notes that ⟨ae⟩ and ⟨oe⟩ don’t have
close English equivalents, and that they “may be pronounced as ai, oi”).
A circumflex “specially prolonged” vowels; according to Appendix E of
The Lord of the Rings, only in Sindarin, but the Ambar Eldaron Quenya
Dictionary [1] also has some very few circumflex words (sû, lîs), so
let’s support the circumflex in Quenya as well. Marking extra-long
vowels with two colons seems to work well and is also done in several
other languages.
[1]: https://ambar-eldaron.com/telechargements/quenya-engl-A4.pdf
Long vowels, marked with an acute accent or a circumflex, are longer
than short vowels (duh) and always make a heavy syllable (i.e. we don’t
include the rules to move stress to the previous syllable). In Quenya,
⟨é⟩ and ⟨ó⟩ are “tenser and ‘closer’” than the short vowels, according
to Appendix E of The Lord of the Rings, while in Sindarin they’re
supposed to be the same; the phonemes we inherit from Latin seem to
reproduce this reasonably well for Quenya, and for now we use them for
Sindarin too, which works nicely for the most common Sindarin word with
a long o, “Lothlórien” (because Lórien is actually a Quenya name, and
therefore I assume *that* ⟨ó⟩ should actually be /o/ and not /ɔ/). I
might adjust the phonemes later (at which point Lothlórien will
presumably have to go in sjn_list).
In Elvish languages, ⟨ch⟩, ⟨dh⟩, and ⟨th⟩ count as single consonants for
the purposes of stress, since they represent single letters in the
original scripts. The easiest way to implement this is to replace them
with single letters at the beginning – ⟨ð⟩ for ⟨dh⟩ and ⟨þ⟩ for ⟨th⟩ are
natural, and ⟨x⟩ for ⟨ch⟩ also makes some sense, though it means we need
to replace real ⟨x⟩ first (it’s not mentioned in Appendix E of The Lord
of the Rings, but does occur in some Quenya words, notably Helcaraxë).
Real ⟨x⟩ is pronounced like /ks/, but of course we need to spell that as
⟨cs⟩, since ⟨k⟩ does not occur in Elvish languages.
The Elvish languages have the same general stress rule as Latin [1]:
stress falls on the penultimate syllable if that is heavy (contains a
long vowel, a diphthong, or a vowel followed by two or more consonants),
otherwise on the antepenultimate syllable. For Latin, espeak-ng
implements this by declaring “penultimate syllable” as the general
stress rule in espeak-ng-data/, and then adding rules in dictsource/
that match light syllables and move the primary stress to the previous
syllable, i.e. the antepenultimate one. We use the same basic principle
for the Elvish languages here (but using the terms “heavy” and “light”
rather than “weak” and “strong” like in the Latin files).
Note that this doesn’t fully implement the stress rules yet: we have no
concept of diphthongs, long vowels aren’t really properly handled yet,
and we also still count ⟨ch⟩, ⟨dh⟩, ⟨th⟩ as two consonants rather than
one as it should be. This will be improved separately (I prefer doing
this in small incremental steps).
[1]: https://menegroth.github.io/stress-in-sindarin.html
Also, inherit the Elvish phonemes from Latin, because Esperanto doesn’t
have /y/. (Quenya doesn’t need that – ⟨y⟩ is a consonant there – so
maybe I’ll separate their phonemes at some point. For now, Latin works
well enough for both as far as I can tell.)
This prepares the languages of Quenya and Sindarin, setting up their
infrastructure without declaring a lot of rules yet – just enough for
“Eä” (a Quenya word, but I can’t think of a similarly simple one for
Sindarin). Phonemes are inherited from Esperanto for now.
Found with the following script:
for file in phsource/ph_*; do
grep -qF "$file" Makefile.am || echo "$file missing!";
done
I’ve left out one of the files highlighted by that script: ph_burmese
exists, but isn’t actually used by phsource/phonemes (there’s no
`include` directive for it).
This commit adds the usual English pronunciation of my name to the English dictionary.
We could, alternatively, add the native pronunciation, `kS'I2StOf` (or the closest approximation to it I could get out of the English synthesizer), but I'm not sure what the policy on that sort of thing is within the project.
Lucas Werkmeister